seams

Project MyWay #7–Michael Kors Knock-off Dress

 picture-112.jpg

Well, I’m back to my old ways–my daughter’s graduation ceremony was yesterday and I made this dress yesterday morning. Good thing I’m an early riser (a little too early–4 a.m. since my trip to India).  So, I made the dress, cooked the food for the graduation party, picked-up the graduation cake and was at the ceremony at 2:00 p.m.!

The dress was perfect, we’ve been having a heat wave in Chicago and it was steamy and humid yesterday so this bright, cool dress was just the ticket. The only thing I didn’t have time to do is to shop for sandals. I was craving a pair of silver sandals to go with this dress. Luckily, I bought these cute Cole Haan black patented leather thongs on sale in January (at the Saks Fifth Ave. Outlet, must’ve been from last season). They worked out fine and I was pleased to be able to walk easily with the heels and crutches.

picture-120.jpg

File this under “I’m so glad I can sew”, I made this dress with a stretch cotton that was on sale for $3.99/yard. It was 60″ wide and so the dress only took one length of fabric, about 1 1/4 yard. I used an invisible zipper and a  stretch cotton from my stash for the lining. The total cost was about $10.00. I featured the Michael Kors version of this dress in my entry titled “What to Wear”.  I tried to find it again on the web, but they must all be sold out, as I recall it was about $1,200.

I used Butterick 4778, a Nicole Miller design, which has been discontinued. Sorry to use an out-of-date pattern, but E. has been giving me a hard time about doing too much and not resting enough since the surgery (sound familiar anyone?), so I didn’t want to ask him to take me to the fabric store for a new pattern. This pattern has just the right design elements–princess seams in the front, scoop neckline in the front and square neckline in the back, very fitted and tapered at the hem. I’m sure there is something similar available in a current pattern.

butterick-4778.jpg

The only pattern alteration I made was to cut the dress off to street length and omit the placket, buttons and front slit. With the shorter length, I didn’t need the slit for walking room. I was really happy to do an easy project without many changes, seems like everything I’ve been making lately has been so complicated.

A perfect fit was the most important priority for this dress. As stated previously, I’m lazy and seldom make a fit sample before I cut into my fashion fabric. This time, I cut the lining first and added a generous amount to all the fitting seams; side seams and front princess seams. Then I basted the lining together and tried it on, with the seam allowances outside. I then pin fitted very carefully to my body, re-basted on the new fit lines, tried on again, just to be sure, added seam allowances to the new seam lines and trimmed off the excess fabric. I removed the basting and used the lining as a pattern for the fashion fabric. This worked great!

I followed the pattern instructions except for 3 things:

1.  I “bagged the lining”–I cut the lining 1″ shorter than the fashion fabric, after constructing the dress and the lining, I sewed the bottom hems of the dress and the lining, right sides together then pressed the finished hem in place. Because the fabric was easy to press, I didn’t need to hand hem the bottom edge.

2.  I finished the shoulder seams with a method I used when I manufactured maternity wear in the early 80’s. I made lots and lots and lots of jumpers and always lined the bodices so I could use this nice shoulder finish I learned from Sew Smart by Judy Lawrence and Clotilde Yurick (click on the picture for instructions):

sew-smart.jpg

Because the shoulder strap area was quite narrow, it was a little tricky sewing the final seam. I was saved by my Bernina Open Toe Foot, it’s good at getting into small places. I took 3-4 stitches at a time, adjusted the fabric, took 3-4 more stitches, etc.

bernina-open-toe-foot.jpg

picture-116.jpg

3.  The pattern called for seam tape to stay the neckline edge. My fabric is stable and a little heavy, so I skipped the seam tape and just stitiched the neckline edges to stay them.

I’m also happy to say I finally inserted an almost perfect invisible zipper. I used this method:

1.  Basted one side of zipper, sewed that side, starting at the bottom and sewing to the top (I don’t use an invisible zipper foot, I find it easier to spread the zipper and stitch close to the teeth.)

2.  Basted other side of zipper, sewed that side, bottom to top

3. Using my regular zipper foot, I started the center back seam, beginning the stitching about 1/2″ above the end of the zipper, stitching as close as possible to the zipper stitching, for about 2″

4.  Changed back to my zig-zag presser foot to finish the CB seam

I didn’t end-up with my customary bubble at the end of the zipper–yea! At the neckline, the zipper stops were perfectly placed on both sides. From the bottom of the zipper to the hem, I did have to ease in a little extra fabric on one side. Seems like it’s almost impossible to avoid this, because of fabric creep, I expect.

I placed the zipper stops right at the 5/8″ neck seam, hoping the zipper would close perfectly without a hook and eye. I’ve seen this on RTW, but it didn’t work. It spreads a little at the top. I hate that. When a detail is at the center back, it seems to glare at you if it’s not perfect. Next time, I’ll put the zipper stops about 3/8″ below the neckline seam and use a hook and eye. (I should take my own advice in the post “How to Fix all Small to Medium Sewing Mistakes”.

This dress will come in handy all summer, for dinner out on a hot night, a casual summer wedding or cocktails at someone’s home. If I can manage to lose the last 10 lbs. I gained between being marathoner and semi-cripple (I can start swimming next week, so that will be a great help) it will be easy to take in the seams on this dress and keep that fitted shillouette.

picture-108.jpg

Project MyWay #4–Garnet Silk Crepe de Chine Blouse

 garnet-top-full.jpg

I saw a blouse like this at Nordstrom, it was around $200-$250 and I didn’t like the colors it came in, royal blue or kelly green. I couldn’t find a pattern to use to copy it, so I made my own.

I started with Butterick 4658, I’ve used this pattern as the beginning of many blouses.

butterick-4658.jpg

First, on the front pattern piece, I drew on a v-neckline. I  measured how low I wanted the new neckline to be and drew a a straight line from the shoulder to the center front. Then I gave the v-neck a nice curve.

garnet-top-front-pattern-piece-1.jpg

I had to shorten the back shoulder seam to match the new front shoulder seam and scoop out the back neckline too.

garnet-top-back-pattern-piece-1.jpg

Then I cut 2″ front and back facings off of the front and back pattern pieces. I added seam allowances to the facings and the front and back neckline.

garnet-top-facings.jpg

I slashed the front and added about 4″ of ease (1″ between each cut). See photo above of front pattern piece. I drew 2 parallel lines 1″ apart and 1″ from center front and slashed and spread the pattern here. I wanted to keep the shirring close to the center front.

I folded out the dart because I had plenty of ease with the new width I was adding. Then I arranged the slashed front pattern piece, with the spacing between the slashes and placed a piece of pattern material over it and traced the new front.garnet-top-front-pattern-piece-2.jpg

I shortened the sleeve 5 1/2″ to just below the elbow. I added a 2″ wide cuff, measuring my arm for the finished length.

The construction went smoothly. As always (see my post on sewing with silks in “Tutorials”) I covered my cutting table with a sheet and pinned the pattern pieces to the fabric and the sheet. This keeps slippery fabric under control. I finished the seams with pinking shears. I have a serger, but the thread showed through to the right side when I pressed the seams. The best way to finish the seams would’ve been with french seams. I marvel at and appreciate all of you who finish you garments so beautifully on the inside. But I’d never get anything finished if I were that perfect. If I’m the only one who is going to see the inside, I finish in the fastest way possible. When I’m sewing for others I make it look good inside.

I constructed the facings, understitched the neck edge and top stitched it. Then I sewed the fully constructed facing unit to the front and back, sewing with all of the raw edges together then pressing toward the garment. Turned out pretty good, if I do say so myself. In this picture you can see my pinked seam allowance at the back neckline.

garnet-top-top.jpg

I love this hem–I first saw it at Donna Karan and the Derek Lam skirt in my Spring ’08 Wardrobe Part 1 post (in Design Inspiration) uses it too. It’s basically a cuff added to the bottom of the blouse. It eliminated the problem of narrow hemming the slippery silk fabric and it adds a little weight to the blouse and makes it hang nicely.

 garnet-top-hem.jpg

I cut 2 front and back band pieces,with a finished width of 4″. I sewed the side seams and sewed them together at the bottom edge. I underdstitched and pressed the band. I sewed the band on to the bottom of the garment, sewing all the raw edges together. Then I finished the seam and pressed it toward the top. (This time I finished the seam with a zig-zag stitch–don’t ask me why!)

garnet-top-inside-hem.jpg

The blouse looks great over skinny jeans or black slacks. And it’s great for those “fat” days!

Ta-ta for now!

Project MyWay #3–Black Cashmere Knit Coat

 picture-052.jpg

picture-041.jpg

I live in the Chicago area and E jokes and says that in June we turn our furnace off and airconditioning on. Unfortunately, most springs are quite chilly and wearing a coat, especially at night is not uncommon. But I’m so sick and tired of my winter coats–I want to have them cleaned and put them away until next winter!

We have 2 good fabric stores in Chicago and Vogue Fabrics has a cashmere knit I’ve been lusting over. It’s a substantial weight (2 ply?) fine gauge knit, like you see on better sweaters. At about $55/yard I let Vogue “keep it” until I came up with a design idea.

I love, love, love this coat! The pictures don’t do it justice. When I get my dressform, I’ll try to take a better picture.

I used Burda 8009 and gave it a asymmetrical front and a stand-up collar and eliminated the front darts by simply folding them together before cutting.  (You can purchase this pattern at The Sewing Place.com) 

burda-8002.jpg

I unerlined the coat with  mid-weight silk twill to stabilize the knit and give it some warmth. I attached the lining to each pattern piece, right sides together and sewed a 1/4″ seam around all sides, leaving an opening to turn. I left the armseye, sleeve and neckline edges raw. When I sewed the seams, I used a scant 1/2″ seam. I was a little worried about how it would look at the hem–lined to the edge and finished before the seams were sewn. But it worked great and was a better hem finish than anything else I could have done. And, wouldn’t you know it, I saw a similar finish on a very expensive designer skirt the other day. It was light weight silk and the hem was narrow hemmed first, then the side seams were sewn. picture-051.jpg

I lined the sleeve in the traditional way,  hand stitching the sleeve cap of the lining to the armseye.

picture-044.jpg

I added 6″ to the front edge of the left front pattern piece to create the asymmetric style. I did not add to the right front, so it does not underlap, it ends at the center front.

picture-046.jpg

I found these great passementerie buttons at M.J. Trim.com . They have lots of unique buttons and trims. The internet has made it so much easier to design clothes exactly the way you envision them instead of having to settle for what can be found in the few good fabric stores.

passimentier-button.jpg

This coat was so much fun to sew beacuse I took some chances and everything worked out very well as I went along. I had to put it aside for a few days to wait for the buttons to arrive and I hung it where I could see it and marveled at it often. Then it came time to make the buttonholes and for some idiotic reason, I made the top bottonhole too close to the edge (about 1/2″ from the edge, should’ve been more like 3/4″ -1″) I literally almost cried, because it was such a stupid thing to do and the rest of the project turned out so perfectly. But I followed my own advice in the Tutorial, “How to fix all small and medium sewing mistakes” and I got over it. It’s not exactly perfect, but close enough.

I’ll try to get a better pictue soon!

 Ta-ta for now!

Project MyWay #1–Black Silk Skirt Alteration Part 2

The skirt alteration turned out great! Here are the steps I took:

1.  I tried the skirt on and put a tight piece of elastic around my waist. I pulled the top of the skirt above the elastic and adjusted it until it looked right and was the right length. I marked the new waistline with pins:

picture-013.jpg

2.  I added a seam allowance and cut off the top of the skirt. I couldn’t leave the zipper in place as I had hoped–after I cut off the skirt there was only an inch or two left, so I removed the rest of the zipper:

picture-016.jpg

3. I inserted a new invisible zipper. As usual, I ended up with a bubble at the end of the zipper. I found a great tutorial that I’ll try next time, it’s a little fussy for me, but at least I’ll baste the zipper in first and I think that will avoid the bubble. http://sewiknit.blogspot.com/2006/03/invisible-zipper-tutorial.html I never use an invisible zipper foot, just a regular zipper foot and I smooth the coil open as I sew.

picture-012.jpg

 4.  I tried on the skirt and fitted it to my waist using the 6 seams–two side front seams, two side back seams and two side seams.

5.  I cut a facing from the upper skirt that I had cut off and finished the new top with the facing. The skirt is lined, so I re-inserted the lining before I sewed on the new facing.

6.  Voila! A new skirt that is shorter and perfectly fitted to my waist–it’s gorgeous! The back is still longer than the front. The only way to change that is to re-hem the back. I don’t want to do that and it looks good as is.

picture-018.jpg

Here is a picture of the back, the bubble at the end of the zipper doesn’t bother me too much. (Check out my entry in Tutorials to find my fool-proof way of fixing little sewing problems.)

picture-010.png

Ta-ta for now.