I wanted to make a pair of shorts to go with my DVF knock-off blouse and fatigue green linen was the way to go. I think the brown shorts paired with the blouse on the Bloomingdale’s site are cotton, but I wanted my shorts to be a little dressier. (See the original outfit in my post Project MyWay #9–DVF Knock-off blouse.) Read more
I’m outside, rain or shine for my job and I’ve been wanting a jacket with a hood so that I don’t have to carry an umbrella unless it’s pouring. There are soooo many great anoraks out there (see one of my favorites in Spring Wardrobe ‘08 part 1) and once I found this Neue Mode Pattern it was easy to come up with a great design. (You can find this pattern at My Notions.com)
I used a black silk shantung I had in my stash. It was super easy to work with and has my favorite fabric quality, it presses beautifully with nice sharp creases. Neue Mode patterns don’t have seam allowances included and I’m just too lazy to draw all those seamlines, so I added seam allowances only where I had to–around the hood opening, the center front, the armseye and sleeve head. Then I used one size larger than normal. This worked out fine, in fact the pattern is so over-sized that I still had to take in the side seam allowances about 1 1/2″ on each side side (for a total of 6″!).
The pattern does not include lining, but I used the pattern pieces to cut a lining from a heavy satin. This gives the anorak a nice, hefty weight and it will be quite warm. Because I lined the jacket, I formed the casing by stitching the lining to the silk. I used elastic and sewed a 2″ wide belt to the ends of the elastic.
I used View A for length and added a 2″ band to the bottom to give the jacket a nice finishing at the hem.
I used the pocket from View C, but instead of regular zippers, I used invisible zippers for a sleeker look.
I wanted to use 3/4″ silver snaps, a la Prada, but I tried a sample and they just don’t work! I’ve never had luck with the snap kits available at the fabric store. Next time I’ll try to find a source online for commercial snaps. So I used covered buttons instead and I like the look, they go well with the dressy fabric.
Here’s a picture of the hood pattern piece. If you can see, I added a 1/4″ seam allowance around the front opening. I didn’t even draw it on, I just added it as I cut-out the pattern. I also added an overlap for the buttons and button holes. I added plenty (around 3″) and trimmed it to fit as I was sewing.
I added a cuff and pleated in the fullness of the sleeve to fit the cuff. I used a method for constructing the cuff that gives a nice square finish:
1. Interface cuff
2. Sew cuff to sleeve bottom, right sides together
3. Fold seam allowances to inside, fold long edge first and then the short ends
4. Fold cuff on fold line and topstitch into place
This works especially well on fabrics the press nicely.
I just ordered a dressform so I can take better pictures of my creations. It’s about time I had one, I’ve been sewing for over 30 years!
Ta-ta for now!