Project MyWay #4–Garnet Silk Crepe de Chine Blouse

 garnet-top-full.jpg

I saw a blouse like this at Nordstrom, it was around $200-$250 and I didn’t like the colors it came in, royal blue or kelly green. I couldn’t find a pattern to use to copy it, so I made my own.

I started with Butterick 4658, I’ve used this pattern as the beginning of many blouses.

butterick-4658.jpg

First, on the front pattern piece, I drew on a v-neckline. I  measured how low I wanted the new neckline to be and drew a a straight line from the shoulder to the center front. Then I gave the v-neck a nice curve.

garnet-top-front-pattern-piece-1.jpg

I had to shorten the back shoulder seam to match the new front shoulder seam and scoop out the back neckline too.

garnet-top-back-pattern-piece-1.jpg

Then I cut 2″ front and back facings off of the front and back pattern pieces. I added seam allowances to the facings and the front and back neckline.

garnet-top-facings.jpg

I slashed the front and added about 4″ of ease (1″ between each cut). See photo above of front pattern piece. I drew 2 parallel lines 1″ apart and 1″ from center front and slashed and spread the pattern here. I wanted to keep the shirring close to the center front.

I folded out the dart because I had plenty of ease with the new width I was adding. Then I arranged the slashed front pattern piece, with the spacing between the slashes and placed a piece of pattern material over it and traced the new front.garnet-top-front-pattern-piece-2.jpg

I shortened the sleeve 5 1/2″ to just below the elbow. I added a 2″ wide cuff, measuring my arm for the finished length.

The construction went smoothly. As always (see my post on sewing with silks in “Tutorials”) I covered my cutting table with a sheet and pinned the pattern pieces to the fabric and the sheet. This keeps slippery fabric under control. I finished the seams with pinking shears. I have a serger, but the thread showed through to the right side when I pressed the seams. The best way to finish the seams would’ve been with french seams. I marvel at and appreciate all of you who finish you garments so beautifully on the inside. But I’d never get anything finished if I were that perfect. If I’m the only one who is going to see the inside, I finish in the fastest way possible. When I’m sewing for others I make it look good inside.

I constructed the facings, understitched the neck edge and top stitched it. Then I sewed the fully constructed facing unit to the front and back, sewing with all of the raw edges together then pressing toward the garment. Turned out pretty good, if I do say so myself. In this picture you can see my pinked seam allowance at the back neckline.

garnet-top-top.jpg

I love this hem–I first saw it at Donna Karan and the Derek Lam skirt in my Spring ’08 Wardrobe Part 1 post (in Design Inspiration) uses it too. It’s basically a cuff added to the bottom of the blouse. It eliminated the problem of narrow hemming the slippery silk fabric and it adds a little weight to the blouse and makes it hang nicely.

 garnet-top-hem.jpg

I cut 2 front and back band pieces,with a finished width of 4″. I sewed the side seams and sewed them together at the bottom edge. I underdstitched and pressed the band. I sewed the band on to the bottom of the garment, sewing all the raw edges together. Then I finished the seam and pressed it toward the top. (This time I finished the seam with a zig-zag stitch–don’t ask me why!)

garnet-top-inside-hem.jpg

The blouse looks great over skinny jeans or black slacks. And it’s great for those “fat” days!

Ta-ta for now!

How to Sew with Knits

  1. Use ballpoint needles, this will fix a multitude of problems. Use size 11 for lightweight fabrics, size 14 for medium weightfabrics and size 16 for heavy fabrics
  2. Lighten pressure on the presser foot so the top and bottom fabric feed together
  3. Use a longer stitch length, 8 to 10 stitches per inch, longer for topstitchinu
  4. If you are using a regular sewing machine, stretch the fabric in front and back of the presser foot as you sew5.
    Sergers are great for knits, but not necessary. Knits do not ravel, so the seams do not even need to be finished.
    You can pink the edges or zigzag if you wish
  5. Use twill tape or seam binding to stabilize shoulder seams. (Sew tape into the shoulder seam.)
  6. I usually prewash knits, but sometimes I construct the garment first and make sure I have plenty of length, then I wash and dry it and finally, hem. Knits usually don’t shrink much in width but they can shrink quite a lot in length
  7. To hem knits use a deep hem–1 1/2″ – 2″ to help the garment hang better. Lengthen the stitch legnth to a short baste. Topstitch, holding fabric taught in front and back of presser foot. Stitch again 3/8″ from first stitching