Well, I’m back to my old ways–my daughter’s graduation ceremony was yesterday and I made this dress yesterday morning. Good thing I’m an early riser (a little too early–4 a.m. since my trip to India). So, I made the dress, cooked the food for the graduation party, picked-up the graduation cake and was at the ceremony at 2:00 p.m.!
The dress was perfect, we’ve been having a heat wave in Chicago and it was steamy and humid yesterday so this bright, cool dress was just the ticket. The only thing I didn’t have time to do is to shop for sandals. I was craving a pair of silver sandals to go with this dress. Luckily, I bought these cute Cole Haan black patented leather thongs on sale in January (at the Saks Fifth Ave. Outlet, must’ve been from last season). They worked out fine and I was pleased to be able to walk easily with the heels and crutches.
File this under “I’m so glad I can sew”, I made this dress with a stretch cotton that was on sale for $3.99/yard. It was 60″ wide and so the dress only took one length of fabric, about 1 1/4 yard. I used an invisible zipper and a stretch cotton from my stash for the lining. The total cost was about $10.00. I featured the Michael Kors version of this dress in my entry titled “What to Wear”. I tried to find it again on the web, but they must all be sold out, as I recall it was about $1,200.
I used Butterick 4778, a Nicole Miller design, which has been discontinued. Sorry to use an out-of-date pattern, but E. has been giving me a hard time about doing too much and not resting enough since the surgery (sound familiar anyone?), so I didn’t want to ask him to take me to the fabric store for a new pattern. This pattern has just the right design elements–princess seams in the front, scoop neckline in the front and square neckline in the back, very fitted and tapered at the hem. I’m sure there is something similar available in a current pattern.
The only pattern alteration I made was to cut the dress off to street length and omit the placket, buttons and front slit. With the shorter length, I didn’t need the slit for walking room. I was really happy to do an easy project without many changes, seems like everything I’ve been making lately has been so complicated.
A perfect fit was the most important priority for this dress. As stated previously, I’m lazy and seldom make a fit sample before I cut into my fashion fabric. This time, I cut the lining first and added a generous amount to all the fitting seams; side seams and front princess seams. Then I basted the lining together and tried it on, with the seam allowances outside. I then pin fitted very carefully to my body, re-basted on the new fit lines, tried on again, just to be sure, added seam allowances to the new seam lines and trimmed off the excess fabric. I removed the basting and used the lining as a pattern for the fashion fabric. This worked great!
I followed the pattern instructions except for 3 things:
1. I “bagged the lining”–I cut the lining 1″ shorter than the fashion fabric, after constructing the dress and the lining, I sewed the bottom hems of the dress and the lining, right sides together then pressed the finished hem in place. Because the fabric was easy to press, I didn’t need to hand hem the bottom edge.
2. I finished the shoulder seams with a method I used when I manufactured maternity wear in the early 80’s. I made lots and lots and lots of jumpers and always lined the bodices so I could use this nice shoulder finish I learned from Sew Smart by Judy Lawrence and Clotilde Yurick (click on the picture for instructions):
Because the shoulder strap area was quite narrow, it was a little tricky sewing the final seam. I was saved by my Bernina Open Toe Foot, it’s good at getting into small places. I took 3-4 stitches at a time, adjusted the fabric, took 3-4 more stitches, etc.
3. The pattern called for seam tape to stay the neckline edge. My fabric is stable and a little heavy, so I skipped the seam tape and just stitiched the neckline edges to stay them.
I’m also happy to say I finally inserted an almost perfect invisible zipper. I used this method:
1. Basted one side of zipper, sewed that side, starting at the bottom and sewing to the top (I don’t use an invisible zipper foot, I find it easier to spread the zipper and stitch close to the teeth.)
2. Basted other side of zipper, sewed that side, bottom to top
3. Using my regular zipper foot, I started the center back seam, beginning the stitching about 1/2″ above the end of the zipper, stitching as close as possible to the zipper stitching, for about 2″
4. Changed back to my zig-zag presser foot to finish the CB seam
I didn’t end-up with my customary bubble at the end of the zipper–yea! At the neckline, the zipper stops were perfectly placed on both sides. From the bottom of the zipper to the hem, I did have to ease in a little extra fabric on one side. Seems like it’s almost impossible to avoid this, because of fabric creep, I expect.
I placed the zipper stops right at the 5/8″ neck seam, hoping the zipper would close perfectly without a hook and eye. I’ve seen this on RTW, but it didn’t work. It spreads a little at the top. I hate that. When a detail is at the center back, it seems to glare at you if it’s not perfect. Next time, I’ll put the zipper stops about 3/8″ below the neckline seam and use a hook and eye. (I should take my own advice in the post “How to Fix all Small to Medium Sewing Mistakes”.
This dress will come in handy all summer, for dinner out on a hot night, a casual summer wedding or cocktails at someone’s home. If I can manage to lose the last 10 lbs. I gained between being marathoner and semi-cripple (I can start swimming next week, so that will be a great help) it will be easy to take in the seams on this dress and keep that fitted shillouette.
I knew I had to have something yellow this spring, it seemed like the freshest color in all the magazines and on the runways. And, several of the sewists on the sewing blogs have been making cute yellow tops (check out, www.ericabunker.com/2008/04/ive-got-yellow-fever.html ) When I saw this beautiful silk Crepe de Chine in a sunflower yellow, I grabbed it!
For this design, I was inspired by the pleated blouses I’ve been seeing lately, like this one from Phillip Lim:
I didn’t have any particular pleating arrangement in mind, so I chose a pattern with the shape I wanted and cut a piece of fabric long enough for the front piece and just started fooling around. I thought it would be easiest to pleat the fabric first and then cut the front pattern piece. I ended up with a 1″ pleat at the center front and 3, 1/2″ pleats on either side.
I used Simplicity 3874, view B, because I liked the neckline and the raglan sleeve. I cut if off to blouse length, folded out the front dart and omitted the empire elastic.
I stitched-down the pleats to withing 6″ of the hem. This way the blouse will look good un-tucked or tucked-in.
I took the original pattern piece and folded out the dart (that’s why the paper pattern looks so wrinkly. Don’t worry about that, just lay the pattern on the fabric and pin it as flat as possible). I put the center front of the pattern piece in the middle of my center pleat. I drew a new side seam line, following the original pattern, easing into the armhole. I drew the new bottom hem.
After drawing the left side, I folded the fabric on the center front and cut the right side, following the lines of the left side.
The back pattern piece only needed shortening, no other alterations.
Step 4, construction: I constructed the top according to the pattern directions, except for the sleeves and neckline.
The sleeve: I cut 4 sleeves and lined them, understitiching at the hem. This avoided narrow hemming the bottom of the sleeves which would have given them a fluttery look. The raglan sleeve has a curved seam in the middle. Next time, I’m going to fool around with the shape of that seam because I’ll bet that it can altered to pull the sleeve in more at the hem. It’s a nice sleeve the way it is, but I would prefer it to be a little more fitted at the hem.
The neckline: after the sleeves were finished, I tried it on and I re-cut the neckline into a broader, deeper boat shape.
Step 5, finishing: I struggled with this. I knew I didn’t want a neckline facing that would pop out and wouldn’t give the pleating any support, I decided on a foldover bias trim. My plan was to make a bias strip, fold it in half, lengthwise, press and then sew it to the wrong side of the neckline. This gives plenty of allowance for error and still make a nice even topstitched fold-over on the right side.
Problem was, I didn’t have enough fabric to cut the bias strip in one piece. So, I cut 2 pieces and proceeded to try to make the seams fall on each shoulder seam. Well, I don’t know if there is a computation for this, I tackled it by sewing one seam in the bias strip and pinning this seam, matching at the shoulder, then pinning the remainder of the neckband until I reached the other shoulder seam.
At this point, because the seam on the bias strip would be a diagonal seam, I didn’t know how to make the band exactly the right length. I did my best to guesstimate, then sewed the diagonal seam, but–oops! I sewed a chevron seam instead of a straight one. Of course, I’d cut off the excess, so now I had a band that was too short. I had to re-cut one side of the bias strip to create a straight seam and create a continuous band.
I knew the band would stretch a little as it was sewen to the neckline and I knew that pulling the neckline in a bit wouldn’t be a bad thing, because it would help keep the neckline from gapping at the collar bone. So I eased the neckline onto the band by going round and round with the pinning, until I had it very evenly eased and was hoping it wouldn’t pleat under the band. I sewed with the band side up to take advantage of the “creep” from the presser foot. At this point, I didn’t really care where the seams of the band hit the neckline, as long as they didn’t fall near the center front:
Voila! It worked! After sewing on the band, I trimmed the seam allowance very carefully to a consistent 1/8″, which gave me a stable, even edge on which to turn the band to the outside and topstitch carefully. Somehow, the band seams ended up symmetrically located–thank you god!
Now, for the hem. I’ve had a wonderful top-of-the line Bernina for 15 years and I had never purchased a narrow hemming foot! The problem with narrow hemming the other way (turning and stitching, trimming and turning and stitching again) is that by the time you stitch around the hem twice on delicate fabric, it almost always starts to flutter.
I’ve been anxious to have a garment to on which to try out my new hemming foot. I also used a technique I saw on a very expensive designer silk skirt (Project MyWay #1). The skirt front was narrow hemmed, the skirt back was narrow hemmed, then the side seams were sewn. If you’re careful to have the side seams of the fronts and backs end at exactly the same place, this gets around the fact that the first half inch in of a hem using a narrow hemming foot looks horrible, as it’s hidden in the side seam.
The new foot was challenging! I went to the web to get some advice, the best I found was this article:
from Jan Andrea, at Home on the Web.It has good pictures and clear instructions. Even with this great tutorial, I was still having trouble catching my stitching on the folded hem. Finally, I changed my single hole sole plate (which I always use on fine fabrics–keeps the fabric from getting shoved down into the throat plate) to the zig-zag throat plate and set my needle position to the right. This worked pretty well, though I still need some practice!:
Conclusion, I love this top! I’m working on the jacket I featured in Spring Wardrobe ‘08 Part 1…
…it’s turning out very nicely. Of course I couldn’t find a bright print like the one here for a top, but the yellow blouse with black slacks will look great with this jacket!
Ta-ta for now!
The untucked shirt thing has been hard for me to wear. I guess I liked the 80’s when a shirt tucked into a skirt or pants with a great belt would really make a statement. But, as I’ve said before, as you get older I think its important to keep up with the major trends. And wearing a shirt tucked in with a great belt looks, well…so 80’s! Untucked shirts can be a godsend to cover-up a tummy.
- Skirts look best with tailored tops that are shorter in length. This is especially true of A-line skirts where it’s imperative to accentuate the waistline (volume on top of volume doesn’t work). Keep the hem of the top on or just above
- Pants look best with tops that are 1 to 3 inches above crotch point
I live in the Chicago area and E jokes and says that in June we turn our furnace off and airconditioning on. Unfortunately, most springs are quite chilly and wearing a coat, especially at night is not uncommon. But I’m so sick and tired of my winter coats–I want to have them cleaned and put them away until next winter!
We have 2 good fabric stores in Chicago and Vogue Fabrics has a cashmere knit I’ve been lusting over. It’s a substantial weight (2 ply?) fine gauge knit, like you see on better sweaters. At about $55/yard I let Vogue “keep it” until I came up with a design idea.
I love, love, love this coat! The pictures don’t do it justice. When I get my dressform, I’ll try to take a better picture.
I used Burda 8009 and gave it a asymmetrical front and a stand-up collar and eliminated the front darts by simply folding them together before cutting. (You can purchase this pattern at The Sewing Place.com)
I unerlined the coat with mid-weight silk twill to stabilize the knit and give it some warmth. I attached the lining to each pattern piece, right sides together and sewed a 1/4″ seam around all sides, leaving an opening to turn. I left the armseye, sleeve and neckline edges raw. When I sewed the seams, I used a scant 1/2″ seam. I was a little worried about how it would look at the hem–lined to the edge and finished before the seams were sewn. But it worked great and was a better hem finish than anything else I could have done. And, wouldn’t you know it, I saw a similar finish on a very expensive designer skirt the other day. It was light weight silk and the hem was narrow hemmed first, then the side seams were sewn.
I lined the sleeve in the traditional way, hand stitching the sleeve cap of the lining to the armseye.
I added 6″ to the front edge of the left front pattern piece to create the asymmetric style. I did not add to the right front, so it does not underlap, it ends at the center front.
I found these great passementerie buttons at M.J. Trim.com . They have lots of unique buttons and trims. The internet has made it so much easier to design clothes exactly the way you envision them instead of having to settle for what can be found in the few good fabric stores.
This coat was so much fun to sew beacuse I took some chances and everything worked out very well as I went along. I had to put it aside for a few days to wait for the buttons to arrive and I hung it where I could see it and marveled at it often. Then it came time to make the buttonholes and for some idiotic reason, I made the top bottonhole too close to the edge (about 1/2″ from the edge, should’ve been more like 3/4″ -1″) I literally almost cried, because it was such a stupid thing to do and the rest of the project turned out so perfectly. But I followed my own advice in the Tutorial, “How to fix all small and medium sewing mistakes” and I got over it. It’s not exactly perfect, but close enough.
I’ll try to get a better pictue soon!
Ta-ta for now!
Sometimes, dressing in a current, up-to-date way is a matter of making small changes to classic styles. In this way one can be in style, but not of the style, if you know what I mean. You wear the clothes, not the other way around.
Following are some Spring ‘08 styles that have interesting details. I don’t want them exactly as shown, but they inspire me with interesting little twists and turns that I can incorporate into my designs. (This is where sewing your own clothes is such a bonus–you can grab a detail here or there from designer looks.)
This outfit has an interesting, slouchy silhoulette–a way to be comfortable without looking messy. I couldn’t wear the “in your face” print–not my style. But I like the tunic style, the feminine boat neckline, the detail at the neck, cuff and hem paired with roomy slacks that would look great with dressy, flat sandals. I can see wearing this to a barbecue on a cool evening and looking dressed, but not dressed-up. (From Bluemarine Spring ‘08 RTW)
This outfit is a great day look for running errands. I’m always looking for casual clothes that will keep me out of predictable jeans or khakis on weekends when I have a million things to do. It would be easy to find a tank dress and layer it over a long sleeve T. What makes this a great look is the rugged belt which I’d pair with rugged flat sandals (no gladiator sandals for me! Aren’t those soooo ‘07 anyway?). I’d stick with sophisticated neutral colors for this outfit. (From D&G Spring ‘08 RTW)
This would be great for work, but without the fussy blouse. What makes this an “outfit” is the full, trouser cut of the pants and the beautiful sheen of the fabric–I’d pair these pants with a simpler snow white silk blouse. When making an “outfit” from two pieces, accessories make it or break it. Pair these pieces with great shoes (red patented leather?) and statement silver jewelry. (From Adam Spring ‘08 RTW)
Ta-ta for now!