Project MyWay #5–Nanette Lepore Knock-off Blouse

nanette-lepore-knok-off-1.jpg

Yes, I did finish the outfit I told you about in my very first post titled Welcome to The Feed Dog. I wore it with the TSE black silk skirt that I re-designed in Project MyWay #1 and my beautiful cashmere knit coat from Project MyWay #3 and my cute booties that I got on sale at Macy’s (marked way down in February). We went to the city for dinner and then to a jazz club and I looked very ou current!

This beatiful silk satin burnout fabric was in my stash, next time I’ll try it in a solid color so the details won’t get lost in the print.

I started with Simplicity 4277 and made some simple changes:

simplicity-4277.jpg

Here is a picture of the Nanette Lepore blouse I wanted to copy:

nanette-lepore-at-nm.jpg

And here is another Nanette Lepore blouse that shows the details better:

nanette-lepore-top.jpg

I wanted the cross over bodice with pleating and the sash under the bust, but the sleeves are too “girly” for me, so I wanted a simple cap sleeve.

Simplicity 4277 was a good place to start, it has the basic design of the Nanette blouse and the changes were easy to make.

For the pleats on the bodice, I slashed and spread the front pattern piece to add more ease to the front and I extended the front past center to create the cross over:

nanette-lepore-knok-off-4.jpg

nanette-lepore-knok-off-6.jpg

I figured out the pleating by folding the new front pattern piece and matching it up to the top of the waistband until it fit. After cutting out the fabric, I pleated each front piece, then lined them and basted the 2 fronts together at the center front. 

nanette-lepore-knok-off-5.jpg

For the sash, I used a pattern piece from a dress I made a couple of years ago:

neue-mode-23326.jpg  I used the hip sash from View C and cut it to fit when I was constructing the waistband. I made the sash for the front only–from side seam to side seam. I didn’t want to deal with it in the back as it would have ended at the center back and made the zipper application very difficult.

nanette-lepore-knok-off-8.jpg

Speaking of zippers, I used a looooong invisible zipper and as I had mentioned, I tried the application I learned in the tutorial on Sew? I knit!–

http://sewiknit.blogspot.com/2006/03/invisible-zipper-tutorial.html

It still had a bubble at the bottom, but it was better than the zipper on my black silk skirt. I’ll keep trying…

The cap sleeve offered in this pattern is gathered at the cap. I didn’t want the gathering, so I used the set-in sleeve of view A and re-drew it into a cap sleeve. 

I then tried something new I saw on a Banana Republic dress, I put a piece of elastic at the center of the hem of the sleeve, about 2″ on either side of the center, for a total of 4″, to pull it in a little.

I love cap sleeves because they are great for summer dresses and blouses, but give a little more coverage than sleeveless tops. But cap sleeves look awful when they point straight out like wings. I find the best looking cap sleeves have plenty of ease in the cap (without being gathered) and this Banana Republic method of inserting elastic at the sleeve hem makes the sleeve nice and fitted. I always self line cap sleeves, it looks so much nicer than narrow hemming the sleeve.

nanette-lepore-knok-off-7.jpg

Ta-ta for now!

Tailoring Tips

To achieve the best results in tailored jackets and coats, know your limitations!  Don’t try to make a fully tailored jacket in a light weight, light colored fabric;  the inside structure is sure to show through.  Fabrics with texture and subtle pattern are most forgiving.  Natural fibers are easiest to press and that is half the battle of a beautifully made garment.  If you have trouble with welt pockets, make a “fake” flap and skip the pocket.  If you can’t topstitch straight, skip it. Some details are worth the extra time they take: Understitch seams wherever you can.  Add mitered corners to reduce bulk.  Hand tape roll lines so lapels fall correctly.  Grade each fabric layer in seam allowances.  Use a damp press cloth for crisp seams (use a seam roll to prevent seam allowance show through).

Tailoring Tips

  1. My favorite tailoring book:  Easy, Easier, Easiest Tailoring by Pati Palmer and Susan Pletsch
  2.  I know fabric in  ready to wear garments is not preshrunk, so I never preshrink.  So far, I’ve never had a problem.  If this makes you nervous, have fabric steam pressed or dry cleaned before you start
  3. Steam fusible interfacing before fusing– place interfacing, resin side down on fabric, hold steaming iron 1-2″ above interfacing for 5-10 seconds.  Watch it shrink!
  4. Use Easy Knit to underline all pattern pieces;  this keeps edges of interfacing and hand stitches from showing through.  It adds body and some bulk to fashion fabric.  Mark darts on the Easy Knit, cut out the dart, and fuse.  This marks the dart perfectly on the fabric and reduces bulk in the dart
  5. For a softly tailored garment, a la Armani, use the Easy Knit method above and very lightweight interfacing
  6.  For a perfect sleeve cap:  Cut a bias strip 1 1/2″ wide and 12″ long from lambswool (the lining in neckties) or from a soft, loosely woven fabric.  Stitch the lambswol to the wrong side of the sleeve head, from notch to notch, just inside the seam line, pulling slighltly taut as you sew.  This adds a little ease so sleeve fits into armhole and gives the sleeve head a nice, rounded shape. Always stitch the sleeve into the armseye with sleeve against feed dogs and the jacket side up. A sleeve head is still needed!
  7. I like to use rayon twill lining to add some body
  8. Topstitch from 1/4” to 1/2″ from edge.  The bulkier the fabric, the further away.  Use a long stitch–6″ to 8″ per inch
  9. I found an awesome method for welt pockets at The Fashion Incubator, http://www.fashion-incubator.com/mt/archives/welt_and_paper_jig.html
  10. Use a felt, suede or ultrasuede undercollar.  My favorite method comes from an old Butterick Pattern magazine. (See instuctions in Tutorials)  Miter the corners of the uppercollar when turning under the edge
  11.  Pressing is important, but too much makes a garment look old and worn out.  I take my jackets and coats to the dry cleaners for a final press. Or, hang a jacket in the closet, sandwiched snugly between other clothes to “press” the lapel 
  12. NEVER press on the right side without a press cloth
  13. Creases can be set by spraying with a solution of 25% vinegar, 75% water, covering with a press cloth and steam pressing on cotton setting