Project MyWay #4–Garnet Silk Crepe de Chine Blouse
I saw a blouse like this at Nordstrom, it was around $200-$250 and I didn’t like the colors it came in, royal blue or kelly green. I couldn’t find a pattern to use to copy it, so I made my own.
I started with Butterick 4658, I’ve used this pattern as the beginning of many blouses.
First, on the front pattern piece, I drew on a v-neckline. I measured how low I wanted the new neckline to be and drew a a straight line from the shoulder to the center front. Then I gave the v-neck a nice curve.
I had to shorten the back shoulder seam to match the new front shoulder seam and scoop out the back neckline too.
Then I cut 2″ front and back facings off of the front and back pattern pieces. I added seam allowances to the facings and the front and back neckline.
I slashed the front and added about 4″ of ease (1″ between each cut). See photo above of front pattern piece. I drew 2 parallel lines 1″ apart and 1″ from center front and slashed and spread the pattern here. I wanted to keep the shirring close to the center front.
I folded out the dart because I had plenty of ease with the new width I was adding. Then I arranged the slashed front pattern piece, with the spacing between the slashes and placed a piece of pattern material over it and traced the new front.
I shortened the sleeve 5 1/2″ to just below the elbow. I added a 2″ wide cuff, measuring my arm for the finished length.
The construction went smoothly. As always (see my post on sewing with silks in “Tutorials”) I covered my cutting table with a sheet and pinned the pattern pieces to the fabric and the sheet. This keeps slippery fabric under control. I finished the seams with pinking shears. I have a serger, but the thread showed through to the right side when I pressed the seams. The best way to finish the seams would’ve been with french seams. I marvel at and appreciate all of you who finish you garments so beautifully on the inside. But I’d never get anything finished if I were that perfect. If I’m the only one who is going to see the inside, I finish in the fastest way possible. When I’m sewing for others I make it look good inside.
I constructed the facings, understitched the neck edge and top stitched it. Then I sewed the fully constructed facing unit to the front and back, sewing with all of the raw edges together then pressing toward the garment. Turned out pretty good, if I do say so myself. In this picture you can see my pinked seam allowance at the back neckline.
I love this hem–I first saw it at Donna Karan and the Derek Lam skirt in my Spring ’08 Wardrobe Part 1 post (in Design Inspiration) uses it too. It’s basically a cuff added to the bottom of the blouse. It eliminated the problem of narrow hemming the slippery silk fabric and it adds a little weight to the blouse and makes it hang nicely.
I cut 2 front and back band pieces,with a finished width of 4″. I sewed the side seams and sewed them together at the bottom edge. I underdstitched and pressed the band. I sewed the band on to the bottom of the garment, sewing all the raw edges together. Then I finished the seam and pressed it toward the top. (This time I finished the seam with a zig-zag stitch–don’t ask me why!)
The blouse looks great over skinny jeans or black slacks. And it’s great for those “fat” days!
Ta-ta for now!